Commercial Rooofing Port Arthur

port arthur >> commercial roofing companies

Commercial Roofing Companies Port Arthur, Tpo Roof Port Arthur, and Mold Remediation Port Arthur

Flat Roof / Commercial Roofing contractor Services

• Roof leak repair & investigation
• Hot tar roofing
• Torch Down roofing and roof repair
• Roof shingles
• Urethane roof coatings
• Single-ply roofing systems and PVC roof repair
• Built up Roofing Systems and Installation
• Modified Bitumen roof repair or re roofing
• EPDM Rubber roof repair or replacement
• Tar and gravel roofing, patchwork and roof repair
• SPF dual component sprayed on foam roof repair or replacement
• Thermal Roof Coatings
• Metal Roof Coatings
• Flat Roof Coatings
• TPO roofs
• Single-ply roofing systems
• Ceramic modified acrylic roof coating systems
• Thermal Reflective ( Heat Reflecting ) white Cool Roof coating
• Contractor grade TPO roofing and single ply membrane
• PVC roofs
• Aluminum Flake Commercial Roof Coatings
• Energy Star rated single ply Cool Roof certified Contractors
• R-panel metal warehouse roofing, repair and replacement
• Energy saving reflective roof coatings

Industrial and Commercial Roofing Services near me

• Full Replacement
• Re-Roofs
• Leak Detection
• Leak Repairs
• Storm Damage
• Hail Damage
• Flat Roof Coatings
• Thermal Roof Coatings
• Roof Shingles
• Single Ply Modified Bitumen
• Metal Roofs
• TPO Roofing
• Built-Up Hot Tar
• Modified Bitumen
• Torch Down

Is commercial roofing hard?

 

Yes roofing is a more physical job than most jobs. But it's only hard just like any other job because you don't enjoy it so it becomes mentally hard,you may be able to keep your job but the mental dislike towards it will cause hardships in other aspects off your life due to stress.

 

Is roofing the hardest job?

 

Roofing topped the list as the most physically demanding job, with 13% of contractors ranking it above all others. This was closely followed by demolition (11%), carpentry (7%), drywall and insulation (7%) and cleaning (6%) to round out the top five.

 

Is roofing good money?

 

Roofers make $10 – 40/hr. Contractors make anywhere from $30k to millions annually but I would say that your average roofing contractor, who maintains a good rep (costly), running on average 10 crew with 2-3 foreman in there is going to be able to make about $100 – 150k a year or more.

 

Do you need qualifications to be a roofer?

 

There are no formal qualifications required to become a roofing operative. However, you could complete a college course, an apprenticeship, or on the job training to move into this career.

 

How much profit does a roof make?

 

Typical roofing companies make between 20 percent and 40 percent gross profit in the roofing industry. The number for service-focused companies may be higher while the number for new construction and large commercial companies may be lower.

 

What are the different types of commercial roofs?

 6 Most Common Commercial Roofs and Roofing Materials:

• Built-Up Roofing (BUR) Membrane
• Metal Roofing.Modified Bitumen Roofing
• Thermoset (EPDM) Roof Membrane
• Thermoplastic (PVC & TPO) Roof Membrane
• Garden Green Roofing System

 

What do commercial roofers do?

 

The roofers can actually roll out thin roofing for your structure, bind thin roofing sheets together, weld metal sections of the roof together, or replace a line of shingles that is causing a leak. If the roof is beyond repair, a professional will recommend a replacement.

 

What is the best roofing system for flat roofs?

 

For many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply commercial roofing materials, however it offers a wide range of benefits for the price.

 

What are the different types of roof construction?

 

Metal Roofs, Built-Up Roofing (BUR), Asphalt Shingles, Synthetic Rubber Slate Tiles, Tile Shingles, Slate Shingles

 

What is EPDM roofing?

 

EPDM is an extremely durable synthetic rubber roofing membrane that is used worldwide. Its superior durability and cost-effectiveness are part of what makes EPDM one of the most popular flat roof systems installed in the U.S. today.

 

How long should a commercial roof last?

 

10 to 40 yearsWhen installed and maintained properly, the average commercial roof can last anywhere from 10 to 40 years. The life expectancy will vary, however, based on the materials used as well as a few other factors.

 

What is the best roof for flat roofs?

 

PVC roofingFor many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply commercial roofing materials, however it offers a wide range of benefits for the price.

 

What is the life expectancy of a EPDM roof?

 

22-35 yearsEthylene Propylene Diene Monomer (EPDM) Rubber Roof Material Most common application method is a fully adhered (glued down) membrane with glued seams / flashings. Material Warranty Period: Up to 40 years. EPDM roof system life expectancy 22-35 years.

 

How long do PVC roofs last?

 

25 yearsA well engineered and installed PVC Roof, where the flashing materials are the same reinforced material as the rest of the roof, can last in excess of 25 years. If you have any questions about the lifespan of your roof or how to make it last longer, contact us today!

 

How much is EPDM roofing cost?

 

Installing an EPDM roofing costs about £45 per square meter on average. When the old roofing material and the roof construction need to be removed, the total cost will be much higher. Roof insulation will entail extra costs as well. So, prices strongly vary depending on the work activities.

 

What do roofers make per hour?

 

Salaries. Roofers made an average $18.54 per hour, or $38,570 per year, as of

 

How much should I pay a roofer per square?

 

Therefore, you have to be updated with how much it will cost, and most contractors will charge between $3.50 to $5.50 per square foot or $350 to $550 per square. Thus, above the price range, you can expect to pay about $4.50 per square.

 

Where do roofers make the most money?

 

According to BLS, the highest paid Roofers are in the states of NY, IL, NJ, HI and MA.

 

How dangerous is roofing?

 

It's bad enough that a fall might kill you, but roofers face a whole host of other on-the-job hazards as well. Burns from volatile tars and chemicals, electrocution from contact with exposed power lines, and injuries from falling tiles and other roofing debris are just a few of the risks roofers face each day.

 

What is the life expectancy of a rubber roof?

 

Most common application method is a fully adhered (glued down) membrane with glued seams / flashings. Material Warranty Period: Up to 40 years. EPDM roof system life expectancy 22-35 year

 

What is the average life expectancy of a rubber roof?

 

One of the most common commercial roofing materials, EPDM rubber roofs are put together using rolls of a highly durable rubber roofing material. While the rubber membrane itself should last around 20 years, the seams between rolls are the weak point, cutting the average EPDM roof life expectancy.

 

How long does a built up roof last?

 

Depending on the climate and the specific materials used, built-up roofing has an average life expectancy of 15 to 30 years, but some constructions can last up to 40 years.

 

How much does building a roof cost?

 

General estimates for most roofs is around $9,000 to $13,500 for a 1,500 square foot roof. That comes out at about $6 to $9 per square foot. Lower estimates could be around $4 per square foot for the simplest and easiest-to-install roofing options.

 

How much does it cost to tear off and replace a roof?

 

On average, it costs from $1.20-$4 per square foot to tear off and replace a roof with asphalt shingles. For a 1,700-2,100 square foot ranch-style property, that costs about $1,700-$8,400. However, roof replacement costs increase when you use higher-end roofing materials.

 

How much does it cost to replace a 1500 sq ft roof?

 

Replacing a roof costs, on average, $5,250-$10,500 with the average homeowner spending around $7,875 on replacing 1,500 sq. ft. of roof with asphalt shingles on a 2 story roof with a chimney.

 

How much does a new roof cost per square?

 

That said, on average, most contractors will charge between $3.50 and $5.50 per square foot or $350 to $550 per square (100 sq. ft.) to install or replace an asphalt shingle roof on a typical house. Thus, at the midpoint of the above price range, you can expect to pay about $4.50 per sq.

 

What to do if you can't afford a new roof?

 

What Can I Do If I Can't Afford a New Roof?Options to Consider.Finance Repair Costs. If you can't afford repairs on your roof, there are several financing options available to help you. Apply for a Grant. Reach out to Your Network. Refinance Your Home. Save the Money. The Roof Doctor is an Affordable Option.

 

How can I pay for a new roof with no money?

 

How Do I Pay for a Roof with No Money? Installing a roof is one of the most important investments into a home that you could make. Factors to Consider. Home Insurance Policy. Payment plans. Financing Through Contractor. Paying With Credit Card. Cash-Out Refinancing. Home Equity Loan.More items...•

 

How do you price a roofing job?

 

How to Price Roofing JobsGet Clear On the Scope of Work.Measure the Roof.Estimate the Material Cost.Estimate Labor Costs.Calculate Your Overhead Costs.Tally All Costs.Add Your

 

Why is roofing so expensive?

 

Tile and Asphalt are the most used materials for roofing, and they're manufactured with the usage of concrete, clay or oil. The rise of oil prices can directly impacted asphalt shingles to become more costly. Furthermore, the cost of disposing old and damaged materials has also increased in the recent years.

 

Is a roofing business profitable?

 

Typical roofing companies make between 20 percent and 40 percent gross profit in the roofing industry. The number for service-focused companies may be higher while the number for new construction and large commercial companies may be lower.

 

What to ask a roofer before hiring?

 

Ask a roofer the following questions before making a hiring decision:What is your full company name and physical address? Do you have insurance? Do you use roofing subcontractors? Do you have a roofing contractor license? Do you have homeowner references? Do you offer a warranty for your roofing work?

 

How much does a new roof cost for a 1500 square foot house?

 

Replacing a roof costs, on average, $5,250-$10,500 with the average homeowner spending around $7,875 on replacing 1,500 sq. ft. of roof with asphalt shingles on a 2 story roof with a chimney.National average cost: $7,875Minimum cost: $3,500Maximum cost: $12,000

 

How long do rubber roofs last?

 

50 yearsAn EPDM rubber roof is incredibly long-lasting and durable. The rubber recycled and used for the synthetic rubber membrane isn't damaged under the sun's UV or ultraviolet rays. If installed correctly, you can expect a rubber roof to in excess of up to 50 years.

 

How much does rubber roofing cost?

 

Rubber roofing costs anywhere between $8,000 to $14,000 to install depending on the slope, pitch, and size of your roof. You can expect to pay $4.25 to $8.25 per sq. foot or $425 to $8825 per square installed on a standard sized single story home.

 

Is rubber roofing expensive?

 

Rubber shingles are three to four times more expensive than asphalt. The price is usually measured for 100 square feet of shingles. Asphalt shingles cost around $100 per square foot, while rubber shingles are $300 to $400 per square foot.

 

Can you walk on EPDM rubber roofing?

 

Yes, but only to an extent. All RKD Rubber Roofing Systems are designed to enable LIGHT foot traffic during installation and for any occasional cleaning or maintenance

 

How good is rubber roofing?

 

Long-Lasting. Rubber roofing is extremely durable. It isn't prone to moss or algae growing on it or prone to being damaged. An EPDM roof is very easy and cost-effective to repair too. Compared to other materials, there are fewer seams, meaning it's extremely rare for a rubber roof to leak.

 

What is the best roofing material for a low pitch roof?

 

Modern low-slope roof or flat roofs tend to use a continuous membrane covering which can better resist pools of standing water. These membranes are applied as continuous sheets, bonded together with heat-welding or adhesives. A more expensive low-slope or flat roof option include sealed metal roofs using copper or tin.

 

How do roofers walk on steep roofs?

 

 

What is the least expensive roof to build?

 

Asphalt shingles are the cheapest roofing material at $100 to $150 per square.Low End - High End: $150 - $6,000Typical Range: $355 - $1,476National Average: $914

 

What is the longest lasting roof material?

 

Roofing material that lasts the longest are concrete, clay or slate tiles. These materials significantly outperform other natural products like wood shakes or any manufactured roofing materials including asphalt shingles and metal roofing.

 

Are metal roofs good for low pitch roofs?

 

The best profiles to use for low-slope projects will be mechanically-locked metal roof systems. Mechanically seamed panels are rollformed with specific edges that line up with each other.

 

What is the best roof membrane?

 

Klober Permo Air is the most breathable felt on the market and is the perfect choice for unventilated roof spaces or climates where condensation is likely to be a problem.

 

Does roof need underlayment?

 

Whether or not underlayment is required, it's always a good idea because it provides the roof deck an extra layer of defense against damage. Snow sitting on roofs and the ice dams that form along a roof's edge can also allow water to seep beneath shingles.

 

Does roofing felt keep water out?

 

Roof felt gives your roof a better appearance and will help it last longer. The felt helps ensure water drains off the roof after a storm. It helps keep your roof free from moisture, which can lead to leaks, rot, and mold. The felt also serves as a protective membrane against ice or snow dams.

 

Are membrane roofs good?

 

Most of these commercial buildings require roof access for mechanical systems or they have occupied roof terraces, making membrane roofs an ideal cost effective solution. The two most common types of flat roof membranes are EPDM and PVC.

 

How do I choose a roof underlayment?

 

A majority of underlayment product offer about the same amount of protection against smoke, but flame protection may vary significantly. Look for a rating of A, B, C. An A rating is the best (this is the most fire-resistant options) and C is the worst (offers the least fire-resistance).

 

What is Sarnafil roofing?

 

Image result for What is Sarnafil roofing?Sika Sarnafil manufactures thermoplastic (PVC), single-ply, commercial roofing and waterproofing membranes. With more than 55 years of roofing and waterproofing experience in locations all over the world Sika Sarnafil is the worldwide market leader in PVC membrane technology.

 

Can you walk on a Sarnafil roof?

 

Sarnafil® T Walkway Pad is used to provide a durable slip resisting walkway for roof maintenance or access on any Sarnafil® T roofing system.

 

How long does a EPDM roof last?

 

An EPDM rubber roof is incredibly long-lasting and durable. The rubber recycled and used for the synthetic rubber membrane isn't damaged under the sun's UV or ultraviolet rays. If installed correctly, you can expect a rubber roof to in excess of up to 50 years.

 

How long does a PVC roof last?

 

A well engineered and installed PVC Roof, where the flashing materials are the same reinforced material as the rest of the roof, can last in excess of 25 years.

 

How Much Does felt roofing cost?

 

The average minimum cost per square foot of roofing felt is $. 39. The average maximum cost per square foot of roofing felt is $. 58.

 

What's the best flat roof system?

 

For many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply #commercialroofing materials, however it offers a wide range of benefits for the price.

 

Why are flat roofs so expensive?

 

In terms of cost, flat roofs do tend to be more expensive than their sloped counterparts. Flat roofing involves more steps, and they typically require insulation to be installed.

 

How much does a GRP roof cost?

 

GRP, or glass reinforced polyester, roofs are $4 to $6 per square foot for labor and materials. They feature a blend of plastic and fiberglass that withstands the elements. You can expect this material to last 25 to 50 years.National Average: $5,877Typical Range: $3,141 - $9,296

 

Should flat roofs have puddles?

 

Puddles or ponding water is water from rainstorms and snow melts that collects on a flat roof and doesn't drain or evaporate after 48 hours. A roof should not have puddles because roofs are not designed to hold the weight of a large amount of water.

Are you tired of looking at your old, outdated roof? Has the integrity of your roof been compromised due to wear and tear over the years? XpertTexas Roofing is a trusted and reputable roofing contractor company in TPO Roofing Contractor Port Arthur, Texas

A roofer, roof mechanic, or roofing contractor is a tradesperson who specializes in roof construction. Roofers replace, repair, and install the roofs of buildings, using a variety of materials, including shingles, bitumen, and metal.

7 Potential Signs That Your Roof May Need To Be Replaced

• Asphalt roofing shingles with curled edges
• ald spots where granules are missing
• Cracked asphalt roofing shingles
• The roof just looks old and worn
• Algae/Dark stains on 3-tab asphalt roofing shingles
• Moss growing on asphalt roofing shingles
• Asphalt roofing shingles with missing granules

Your Local Greater Port Arthur Chamber of Commerce

Address: 501 Procter St Suite 300
Port Arthur,TX 77640

www.portarthurtexas.com
Phone Number: 4099631107

Visit Port Arthur, TX
Port Arthur Texas

Port Arthur is a cities in Jefferson County within the Beaumont–Port Arthur metropolitan area of the U.S. state of Texas. A small, uninhabited portion extends into Orange County. It is 90 mi (140 km) east of Houston. The largest oil refinery in the United States, the Motiva Refinery is located in Port Arthur.The population of Port Arthur was 53,818 at the 2010 census, down from 57,755 at the 2000 census. Early attempts at settlements in the area had all failed. However, in 1895, Arthur Stilwell founded Port Arthur, and the town quickly grew. Port Arthur was incorporated as a cities in 1898 and soon developed into a seaport. It eventually became the center of a large oil refinery network. The Rainbow Bridge across the Neches River connects Port Arthur to Bridge cities.Port Arthur is vulnerable to hurricanes and extensive damage to the cities has been caused several times.
Learn more about Port Arthur TX - Visit Port Arthur

Port Arthur, Texas

77611
Xpert Texas

• •  

    Important information for Port Arthur  located in Orange County

    We wish to provide you the 5 star experience our Port Arthur clients frequently prepare for. Call us today.
     

    Related Services

    • Mold Remediation

      Mold Inspection

      Fire Restoration

      Disinfection Services

      TPO Roof Replacement

      All About Port Arthur Texas

      Port Arthur Neighborhoods, Restaurants and Hotels

      ---

Top sites to see in Port Arthur Texas

• Museum of the Gulf Coast : The Museum of the Gulf Coast, located in Port Arthur, Texas, specializes in Texas and Louisiana Gulf Coast history. Its most notable exhibits are a gallery of Robert Rauschenberg's artworks and a Music Hall of Fame honoring performers from the region; featured in the latter are artifacts of Janis Joplin's youth. The museum is sponsored and administered by the Port Arthur Historical Society, and is the descendant of the original Port Arthur Museum chartered by the state in 1964. The administration of the museum is done in partnership with Lamar State College-Port Arthur and the City of Port Arthur. Wikipedia
  
• Doornbos Heritage Park : Recreation area with a duck pond
  
• Pompeiian Villa : The Pompeiian Villa is a historic house in Port Arthur, Texas, U.S.. It was built in 1900 for Isaac Ellwood, and designed by architects George C. Nimmons and William K. Fellows. It belonged to James Hopkins, the vice president of the Diamond Match Company, from 1901 to 1903, when it was sold to George Craig for 10% of Texaco. It has been listed on the National Register of Historic Places since May 23, 1973. The house is owned by the Port Arthur Historical Society, and is open for tours by reservation with the Museum of the Gulf Coast. Wikipedia
  
• Buu Mon Buddhist Temple : Chua Buu Mon is a Buddhist Temple located on Proctor Street in Port Arthur, Texas. Wikipedia
  
• Sabine Pass Battleground State Historic Site : Sabine Pass Battleground State Historic Site is located in Jefferson County, Texas, where the Sabine River enters the Gulf of Mexico. The site is the location of a significant Civil War battle. In September 1863, members of the Davis Guard—led by Confederate Lt. Richard "Dick" Dowling—held off a Union attack at Sabine Pass, a key port for Confederate shipments of supplies. In a battle lasting less than an hour, Dowling and his men destroyed two gunboats, captured nearly 350 prisoners, and prevented Union forces from penetrating the Texas interior. Today, the site is operated as a historic site by the Texas Historical Commission. Features include the 1936 statue honoring Dowling's feats, a monument dedicated to the Union casualties, outdoor educational exhibits, and a scale model of the Civil War-era fort and battle. Wikipedia
  
• J.D. Murphree Wildlife Management Area : Marshland preserve with seasonal hunting
  
• Sabine Pass Lighthouse : The Sabine Pass Lighthouse, or Sabine Pass Light as it was referred to by the United States Coast Guard, is a historic lighthouse, as part of a gulf coast light station, on the Louisiana side of the Sabine River, in Cameron Parish, across from the community of Sabine Pass, Texas. It was first lit in 1857 and was deactivated by the Coast Guard in 1952. One of only three built in the United States of similar design, the light was listed on the National Register of Historic Places as "Sabine Pass Lighthouse" on December 17, 1981. It is now abandoned but has long continued to be the subject of preservation efforts. The Calcasieu Historical Preservation Society – with interest because the lighthouse was once in Calcasieu Parish – has listed that the lighthouse may be the oldest brick structure still standing in Southwest Louisiana. Wikipedia
  
• Dutch Windmill Museum : Museum