Commercial Rooofing Lantana

lantana >> commercial roofing companies

Commercial Roofing Companies Lantana, Tpo Roof Lantana, and Mold Remediation Lantana

Flat Roof / Commercial Roofing contractor Services

• Roof leak repair & investigation
• Hot tar roofing
• Torch Down roofing and roof repair
• Roof shingles
• Urethane roof coatings
• Single-ply roofing systems and PVC roof repair
• Built up Roofing Systems and Installation
• Modified Bitumen roof repair or re roofing
• EPDM Rubber roof repair or replacement
• Tar and gravel roofing, patchwork and roof repair
• SPF dual component sprayed on foam roof repair or replacement
• Thermal Roof Coatings
• Metal Roof Coatings
• Flat Roof Coatings
• TPO roofs
• Single-ply roofing systems
• Ceramic modified acrylic roof coating systems
• Thermal Reflective ( Heat Reflecting ) white Cool Roof coating
• Contractor grade TPO roofing and single ply membrane
• PVC roofs
• Aluminum Flake Commercial Roof Coatings
• Energy Star rated single ply Cool Roof certified Contractors
• R-panel metal warehouse roofing, repair and replacement
• Energy saving reflective roof coatings

Industrial and Commercial Roofing Services near me

• Full Replacement
• Re-Roofs
• Leak Detection
• Leak Repairs
• Storm Damage
• Hail Damage
• Flat Roof Coatings
• Thermal Roof Coatings
• Roof Shingles
• Single Ply Modified Bitumen
• Metal Roofs
• TPO Roofing
• Built-Up Hot Tar
• Modified Bitumen
• Torch Down

Is commercial roofing hard?

 

Yes roofing is a more physical job than most jobs. But it's only hard just like any other job because you don't enjoy it so it becomes mentally hard,you may be able to keep your job but the mental dislike towards it will cause hardships in other aspects off your life due to stress.

 

Is roofing the hardest job?

 

Roofing topped the list as the most physically demanding job, with 13% of contractors ranking it above all others. This was closely followed by demolition (11%), carpentry (7%), drywall and insulation (7%) and cleaning (6%) to round out the top five.

 

Is roofing good money?

 

Roofers make $10 – 40/hr. Contractors make anywhere from $30k to millions annually but I would say that your average roofing contractor, who maintains a good rep (costly), running on average 10 crew with 2-3 foreman in there is going to be able to make about $100 – 150k a year or more.

 

Do you need qualifications to be a roofer?

 

There are no formal qualifications required to become a roofing operative. However, you could complete a college course, an apprenticeship, or on the job training to move into this career.

 

How much profit does a roof make?

 

Typical roofing companies make between 20 percent and 40 percent gross profit in the roofing industry. The number for service-focused companies may be higher while the number for new construction and large commercial companies may be lower.

 

What are the different types of commercial roofs?

 6 Most Common Commercial Roofs and Roofing Materials:

• Built-Up Roofing (BUR) Membrane
• Metal Roofing.Modified Bitumen Roofing
• Thermoset (EPDM) Roof Membrane
• Thermoplastic (PVC & TPO) Roof Membrane
• Garden Green Roofing System

 

What do commercial roofers do?

 

The roofers can actually roll out thin roofing for your structure, bind thin roofing sheets together, weld metal sections of the roof together, or replace a line of shingles that is causing a leak. If the roof is beyond repair, a professional will recommend a replacement.

 

What is the best roofing system for flat roofs?

 

For many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply commercial roofing materials, however it offers a wide range of benefits for the price.

 

What are the different types of roof construction?

 

Metal Roofs, Built-Up Roofing (BUR), Asphalt Shingles, Synthetic Rubber Slate Tiles, Tile Shingles, Slate Shingles

 

What is EPDM roofing?

 

EPDM is an extremely durable synthetic rubber roofing membrane that is used worldwide. Its superior durability and cost-effectiveness are part of what makes EPDM one of the most popular flat roof systems installed in the U.S. today.

 

How long should a commercial roof last?

 

10 to 40 yearsWhen installed and maintained properly, the average commercial roof can last anywhere from 10 to 40 years. The life expectancy will vary, however, based on the materials used as well as a few other factors.

 

What is the best roof for flat roofs?

 

PVC roofingFor many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply commercial roofing materials, however it offers a wide range of benefits for the price.

 

What is the life expectancy of a EPDM roof?

 

22-35 yearsEthylene Propylene Diene Monomer (EPDM) Rubber Roof Material Most common application method is a fully adhered (glued down) membrane with glued seams / flashings. Material Warranty Period: Up to 40 years. EPDM roof system life expectancy 22-35 years.

 

How long do PVC roofs last?

 

25 yearsA well engineered and installed PVC Roof, where the flashing materials are the same reinforced material as the rest of the roof, can last in excess of 25 years. If you have any questions about the lifespan of your roof or how to make it last longer, contact us today!

 

How much is EPDM roofing cost?

 

Installing an EPDM roofing costs about £45 per square meter on average. When the old roofing material and the roof construction need to be removed, the total cost will be much higher. Roof insulation will entail extra costs as well. So, prices strongly vary depending on the work activities.

 

What do roofers make per hour?

 

Salaries. Roofers made an average $18.54 per hour, or $38,570 per year, as of

 

How much should I pay a roofer per square?

 

Therefore, you have to be updated with how much it will cost, and most contractors will charge between $3.50 to $5.50 per square foot or $350 to $550 per square. Thus, above the price range, you can expect to pay about $4.50 per square.

 

Where do roofers make the most money?

 

According to BLS, the highest paid Roofers are in the states of NY, IL, NJ, HI and MA.

 

How dangerous is roofing?

 

It's bad enough that a fall might kill you, but roofers face a whole host of other on-the-job hazards as well. Burns from volatile tars and chemicals, electrocution from contact with exposed power lines, and injuries from falling tiles and other roofing debris are just a few of the risks roofers face each day.

 

What is the life expectancy of a rubber roof?

 

Most common application method is a fully adhered (glued down) membrane with glued seams / flashings. Material Warranty Period: Up to 40 years. EPDM roof system life expectancy 22-35 year

 

What is the average life expectancy of a rubber roof?

 

One of the most common commercial roofing materials, EPDM rubber roofs are put together using rolls of a highly durable rubber roofing material. While the rubber membrane itself should last around 20 years, the seams between rolls are the weak point, cutting the average EPDM roof life expectancy.

 

How long does a built up roof last?

 

Depending on the climate and the specific materials used, built-up roofing has an average life expectancy of 15 to 30 years, but some constructions can last up to 40 years.

 

How much does building a roof cost?

 

General estimates for most roofs is around $9,000 to $13,500 for a 1,500 square foot roof. That comes out at about $6 to $9 per square foot. Lower estimates could be around $4 per square foot for the simplest and easiest-to-install roofing options.

 

How much does it cost to tear off and replace a roof?

 

On average, it costs from $1.20-$4 per square foot to tear off and replace a roof with asphalt shingles. For a 1,700-2,100 square foot ranch-style property, that costs about $1,700-$8,400. However, roof replacement costs increase when you use higher-end roofing materials.

 

How much does it cost to replace a 1500 sq ft roof?

 

Replacing a roof costs, on average, $5,250-$10,500 with the average homeowner spending around $7,875 on replacing 1,500 sq. ft. of roof with asphalt shingles on a 2 story roof with a chimney.

 

How much does a new roof cost per square?

 

That said, on average, most contractors will charge between $3.50 and $5.50 per square foot or $350 to $550 per square (100 sq. ft.) to install or replace an asphalt shingle roof on a typical house. Thus, at the midpoint of the above price range, you can expect to pay about $4.50 per sq.

 

What to do if you can't afford a new roof?

 

What Can I Do If I Can't Afford a New Roof?Options to Consider.Finance Repair Costs. If you can't afford repairs on your roof, there are several financing options available to help you. Apply for a Grant. Reach out to Your Network. Refinance Your Home. Save the Money. The Roof Doctor is an Affordable Option.

 

How can I pay for a new roof with no money?

 

How Do I Pay for a Roof with No Money? Installing a roof is one of the most important investments into a home that you could make. Factors to Consider. Home Insurance Policy. Payment plans. Financing Through Contractor. Paying With Credit Card. Cash-Out Refinancing. Home Equity Loan.More items...•

 

How do you price a roofing job?

 

How to Price Roofing JobsGet Clear On the Scope of Work.Measure the Roof.Estimate the Material Cost.Estimate Labor Costs.Calculate Your Overhead Costs.Tally All Costs.Add Your

 

Why is roofing so expensive?

 

Tile and Asphalt are the most used materials for roofing, and they're manufactured with the usage of concrete, clay or oil. The rise of oil prices can directly impacted asphalt shingles to become more costly. Furthermore, the cost of disposing old and damaged materials has also increased in the recent years.

 

Is a roofing business profitable?

 

Typical roofing companies make between 20 percent and 40 percent gross profit in the roofing industry. The number for service-focused companies may be higher while the number for new construction and large commercial companies may be lower.

 

What to ask a roofer before hiring?

 

Ask a roofer the following questions before making a hiring decision:What is your full company name and physical address? Do you have insurance? Do you use roofing subcontractors? Do you have a roofing contractor license? Do you have homeowner references? Do you offer a warranty for your roofing work?

 

How much does a new roof cost for a 1500 square foot house?

 

Replacing a roof costs, on average, $5,250-$10,500 with the average homeowner spending around $7,875 on replacing 1,500 sq. ft. of roof with asphalt shingles on a 2 story roof with a chimney.National average cost: $7,875Minimum cost: $3,500Maximum cost: $12,000

 

How long do rubber roofs last?

 

50 yearsAn EPDM rubber roof is incredibly long-lasting and durable. The rubber recycled and used for the synthetic rubber membrane isn't damaged under the sun's UV or ultraviolet rays. If installed correctly, you can expect a rubber roof to in excess of up to 50 years.

 

How much does rubber roofing cost?

 

Rubber roofing costs anywhere between $8,000 to $14,000 to install depending on the slope, pitch, and size of your roof. You can expect to pay $4.25 to $8.25 per sq. foot or $425 to $8825 per square installed on a standard sized single story home.

 

Is rubber roofing expensive?

 

Rubber shingles are three to four times more expensive than asphalt. The price is usually measured for 100 square feet of shingles. Asphalt shingles cost around $100 per square foot, while rubber shingles are $300 to $400 per square foot.

 

Can you walk on EPDM rubber roofing?

 

Yes, but only to an extent. All RKD Rubber Roofing Systems are designed to enable LIGHT foot traffic during installation and for any occasional cleaning or maintenance

 

How good is rubber roofing?

 

Long-Lasting. Rubber roofing is extremely durable. It isn't prone to moss or algae growing on it or prone to being damaged. An EPDM roof is very easy and cost-effective to repair too. Compared to other materials, there are fewer seams, meaning it's extremely rare for a rubber roof to leak.

 

What is the best roofing material for a low pitch roof?

 

Modern low-slope roof or flat roofs tend to use a continuous membrane covering which can better resist pools of standing water. These membranes are applied as continuous sheets, bonded together with heat-welding or adhesives. A more expensive low-slope or flat roof option include sealed metal roofs using copper or tin.

 

How do roofers walk on steep roofs?

 

 

What is the least expensive roof to build?

 

Asphalt shingles are the cheapest roofing material at $100 to $150 per square.Low End - High End: $150 - $6,000Typical Range: $355 - $1,476National Average: $914

 

What is the longest lasting roof material?

 

Roofing material that lasts the longest are concrete, clay or slate tiles. These materials significantly outperform other natural products like wood shakes or any manufactured roofing materials including asphalt shingles and metal roofing.

 

Are metal roofs good for low pitch roofs?

 

The best profiles to use for low-slope projects will be mechanically-locked metal roof systems. Mechanically seamed panels are rollformed with specific edges that line up with each other.

 

What is the best roof membrane?

 

Klober Permo Air is the most breathable felt on the market and is the perfect choice for unventilated roof spaces or climates where condensation is likely to be a problem.

 

Does roof need underlayment?

 

Whether or not underlayment is required, it's always a good idea because it provides the roof deck an extra layer of defense against damage. Snow sitting on roofs and the ice dams that form along a roof's edge can also allow water to seep beneath shingles.

 

Does roofing felt keep water out?

 

Roof felt gives your roof a better appearance and will help it last longer. The felt helps ensure water drains off the roof after a storm. It helps keep your roof free from moisture, which can lead to leaks, rot, and mold. The felt also serves as a protective membrane against ice or snow dams.

 

Are membrane roofs good?

 

Most of these commercial buildings require roof access for mechanical systems or they have occupied roof terraces, making membrane roofs an ideal cost effective solution. The two most common types of flat roof membranes are EPDM and PVC.

 

How do I choose a roof underlayment?

 

A majority of underlayment product offer about the same amount of protection against smoke, but flame protection may vary significantly. Look for a rating of A, B, C. An A rating is the best (this is the most fire-resistant options) and C is the worst (offers the least fire-resistance).

 

What is Sarnafil roofing?

 

Image result for What is Sarnafil roofing?Sika Sarnafil manufactures thermoplastic (PVC), single-ply, commercial roofing and waterproofing membranes. With more than 55 years of roofing and waterproofing experience in locations all over the world Sika Sarnafil is the worldwide market leader in PVC membrane technology.

 

Can you walk on a Sarnafil roof?

 

Sarnafil® T Walkway Pad is used to provide a durable slip resisting walkway for roof maintenance or access on any Sarnafil® T roofing system.

 

How long does a EPDM roof last?

 

An EPDM rubber roof is incredibly long-lasting and durable. The rubber recycled and used for the synthetic rubber membrane isn't damaged under the sun's UV or ultraviolet rays. If installed correctly, you can expect a rubber roof to in excess of up to 50 years.

 

How long does a PVC roof last?

 

A well engineered and installed PVC Roof, where the flashing materials are the same reinforced material as the rest of the roof, can last in excess of 25 years.

 

How Much Does felt roofing cost?

 

The average minimum cost per square foot of roofing felt is $. 39. The average maximum cost per square foot of roofing felt is $. 58.

 

What's the best flat roof system?

 

For many projects, PVC roofing is our preferred choice as the best flat roof material on the market. PVC roofing is somewhat more expensive than other single-ply #commercialroofing materials, however it offers a wide range of benefits for the price.

 

Why are flat roofs so expensive?

 

In terms of cost, flat roofs do tend to be more expensive than their sloped counterparts. Flat roofing involves more steps, and they typically require insulation to be installed.

 

How much does a GRP roof cost?

 

GRP, or glass reinforced polyester, roofs are $4 to $6 per square foot for labor and materials. They feature a blend of plastic and fiberglass that withstands the elements. You can expect this material to last 25 to 50 years.National Average: $5,877Typical Range: $3,141 - $9,296

 

Should flat roofs have puddles?

 

Puddles or ponding water is water from rainstorms and snow melts that collects on a flat roof and doesn't drain or evaporate after 48 hours. A roof should not have puddles because roofs are not designed to hold the weight of a large amount of water.

Are you tired of looking at your old, outdated roof? Has the integrity of your roof been compromised due to wear and tear over the years? XpertTexas Roofing is a trusted and reputable roofing contractor company in TPO Roofing Contractor Lantana, Texas

A roofer, roof mechanic, or roofing contractor is a tradesperson who specializes in roof construction. Roofers replace, repair, and install the roofs of buildings, using a variety of materials, including shingles, bitumen, and metal.

7 Potential Signs That Your Roof May Need To Be Replaced

• Asphalt roofing shingles with curled edges
• ald spots where granules are missing
• Cracked asphalt roofing shingles
• The roof just looks old and worn
• Algae/Dark stains on 3-tab asphalt roofing shingles
• Moss growing on asphalt roofing shingles
• Asphalt roofing shingles with missing granules

Lantana Texas

Lantana is an upscale census-designated place (CDP) and master-planned community originally developed by Republic Property Group, 8 miles (13 km) south of Denton in unincorporated Denton County, Texas, United States. The population of the CDP at the 2010 census was 6,874. Lantana had 3,274 occupied homes as of December 31, 2015, with an estimated population of 10,641. Lantana shares the 76226 ZIP code of Argyle. Approximately one quarter of the populace have an annual household income of greater than $150,000, with 34% having incomes from $75,000-$150,000. Almost half of the Lantana population has a bachelor's degree or higher. In 2004, 2006, 2011 and 2012, Lantana won the People's Choice Award for Community of the Year at the Dallas Homebuilders Association McSAM Awards. Lantana hosts regular community events, such as outdoor music presentations in the parks, chili cook offs, festivals, picnics, and other similar functions for its residents.Lantana encompasses 1,780 acres (7.2 km2). It was developed starting in 1999 on land acquired from the Rayzor family (known as Rayzor Ranch). On March 16, 2000, Republic Property broke ground on the community. Larkspur and Sandlin were the first neighborhoods developed. The first residents moved in on July 31, 2001. In the first quarter of 2014, Forestar Group, Inc, an original equity partner along with Republic Property Group, acquired the remaining partnership interest in Lantana and will continue with the final development of the community.The homes in Lantana are built around an 18-hole golf course, designed by award-winning golf architect Jay Morrish. In October 2003, Lantana Golf Club became a semi-private facility. In October 2004, a 7,500 square-foot club house expansion was completed providing new facilities such as men's and women's locker rooms, men's card room and lounge, playroom, and a state-of-the-art fitness facility. The club went private in early 2009.The Lantana Community Association, Lantana's HOA, is managed by Insight Association Management. HOA dues cover Grande Communication basic cable television (19 channels), CoSecurity 24-hour security monitoring and system installation, front yard maintenance, and amenities - including five community pools, a water spray park, two fitness centers, playgrounds, tennis courts, hike and bike trails and parks. The Board of Directors of the Lantana Community Association are: Tara Boswell, Christi Brownlow and Darrel Amen. The Association is currently in the process of transitioning over to a Resident Board of Directors after the reaching the community size the state of Texas requires to do so. Lantana's monthly Board meetings are open to the public and take place in the Bartonville Town Square. Residents who have individual concerns about their home or the community in general may present those items at the monthly meetings.Lantana residents pay an annual fee, through the Lantana Community Association, to the Argyle Volunteer Fire Department (AVFD) for Fire and EMS service. The fee is based on the appraised value of each home and the rate charged by the AVFD. The effective rate for 2010 was .059318 per $100 of appraised value.Lantana is located in Development District #4, Fresh Water Supply District #6 and Fresh Water Supply District #7. A Fresh Water Supply District (FWSD) is a political subdivision of the State of Texas, authorized by the Texas Commission of Environmental Quality, to provide water, sewage, drainage and other services within the district's boundaries.The number of local retail destinations is increasing within Lantana. The first development took place at the southeastern area of the community at the northwestern corner of the intersection of FM407 (Justin Rd.) and Copper Canyon Rd. Currently, CVS, Pizza Hut, Sonic Drive-In, Lantana Dry Cleaners, Kwik Kar Oil and Lube, Kwik Kar Car Wash and Primrose School of Lantana are open for business. A small retail center is under construction at the northeast corner of FM407 and Simmons Rd. At the southwestern corner of the community along FM407 between Jeter Rd. and McMakin Rd., NewQuest properties is constructing Lantana Town Center. Anchored by a Kroger Marketplace grocery store with a Fuel Center on the western side of the project, initial plans show several small retail stores along with restaurants. The Kroger Fuel center was opened February 2015 and the Kroger Marketplace opened on May 22, 2015. Several restaurants and stores have already opened within Lantana Town Center.The publicly elected Board of Directors manages and controls all of the affairs of the district, subject to the continuing supervision of the Texas Commission of Environmental Quality. The Board establishes policies in the interest of its residents and utility customers. A district may adopt and enforce all necessary charges, fees and taxes in order to provide facilities and service.Four of Denton ISD's schools are located within the community: Tom Harpool Middle School and Annie Blanton Elementary School, which opened in August 2008, Eugenia Porter Rayzor Elementary, which was the first school to be built and opened in August 2002, and Dorothy Adkins Elementary School, which opened in August 2014. Blanton and EP Rayzor elementary schools are rated "Exemplary" and the middle school is rated "Recognized." Lantana is served by John H. Guyer High School, located in southern Denton, TX, about 3 miles (4.8 km) north of the northernmost neighborhood (Madison).Lantana is divided into subdivisions or neighborhoods listed below:
Learn more about Lantana TX - Visit Lantana

Lantana, Texas

76226
Xpert Texas

• •  

    Important information for Lantana  located in Denton County

    We want to give you the 5 star experience our Lantana clients frequently plan for. Call us today.
     

    Related Services

    • Mold Remediation

      Mold Inspection

      Fire Restoration

      Disinfection Services

      TPO Roof Replacement

      All About Lantana Texas

      Lantana Neighborhoods, Restaurants and Hotels

      ---

Top sites to see in Lantana Texas

• Old Alton Bridge : Old Alton Bridge, also known as Goatman's Bridge, is a historic iron truss bridge connecting the Texas cities of Denton and Copper Canyon. Built in 1884 by the King Iron Bridge Manufacturing Company, it originally carried horses and later automobiles over Hickory Creek at a location that once was a popular ford for crossing cattle. The bridge takes its name from the abandoned community of Alton, which between 1850 and 1856 was the seat of Denton County. The heavily traveled Old Alton Bridge remained in constant use until 2001 when vehicle traffic was moved to an adjacent concrete-and-steel bridge. Prior to the new bridge, it was necessary for motorists to signal with a car horn before crossing the single-lane span. The new bridge straightened out a sharp curve on both sides of the creek and provided additional travel lanes. With vehicle traffic removed, the bridge became an important link connecting the Elm Fork and Pilot Knoll Hiking and Equestrian Trails. Today, it is a popular location for nature enthusiasts and photographers. Old Alton Bridge was included in the National Register of Historic Places on July 8, 1988.
  
• Old Alton Road : History
  
• Trophy Club Park : Site with ATV trails, disc golf & more