Mold Remediation Corpus Christi and Removal

We offer Mold Remediation services in Corpus Christi , call us today!

corpus christi >> mold remediation

Mold Remediation Corpus Christi and Removal

Call +13612887193.We are a full service mold remediation company that provides mold removal and remediation and prevention to help protect you and your family from mold.

Mold Remediation Corpus Christi Services

The #1 Corpus Christi TX Mold Remediation Company

Mold Remediation means the action of remedying something, in particular of reversing or stopping environmental damage. When we use the terms mold abatement, mold removal or mold remediation, we use those terms interchangeably. We are removing the mold which is remediating the mold situation which is ending it, abatement.



What is mold remediation?

Mold remediation focuses on getting mold levels back to normal, natural levels. Every mold damage scenario is different and requires a unique solution, but the general #moldremediation process stays the same.

According to the EPA’s a Brief Guide to Mold

  • The key to mold control is moisture control
  • It is important to begin drying flooded areas and items within 24-48 hours to prevent mold growth
  • There are many types of mold, and none of them will grow without moisture

Do I really need mold remediation in Corpus Christi?

Although some species do not cause odors, when a musty, moldy odor is combined with other criteria, one can conclude that mold is present. Even if mold is not visible, remediation may be necessary. Odor alone should not be the only criterion used to determine whether remediation is necessary.

Mold Remediation Process - Duration

Mold remediation can quickly and safely remove a mold infestation from your home or office. Depending on the size of your problem, mold remediation might take anywhere from one to seven days (or more) to wipe out the major sources of mold in your home.

Mold Remediation Cost in Corpus Christi TX

On average, professional mold remediation costs $500 to $6,000 -- but the price can soar into the tens of thousands if the problem is severe. Here's what you need to know about hiring professional mold inspectors and remediation companies..

Corpus Christi TX Mold Removal

Do it Yourself

Choosing method of treating a building contaminated with black mold on your own can result in: Making the Situation Worse: Black mold releases spores, which can spread if not properly contained during removal. This can cause the mold to appear in other areas of your home, making a small problem a much larger issue.

Mold Remediation Process in Corpus Christi Texas

  • Mold Inspection
  • Mold containtment
  • Negative air Pressure
  • Air Filtration
  • Drywall Mold removal
  • Stud Mold Removal
  • Anti Microbial applied
  • HEPA Vacuum
  • Sanitization

Mold Remediation work plan

  • A mold remediation contractor shall prepare a mold remediation work plan that is specific to each project, fulfills all the requirements of the mold remediation protocol and provides specific instructions and/or standard operating procedures for how a mold remediation project will be performed. The remediation contractor shall provide the mold remediation work plan to the client before site preparation work begins.
  • Conducting and interpreting the results of activities recommended in a work plan developed under paragraph (1), including any of the activities of a registered mold remediation worker under §78.56.
 

Choosing to handle black mold removal on your own can result in: Making the Situation Worse: Black mold releases spores, which can spread if not properly contained during removal. This can cause the mold to appear in other areas of your home, making a small problem a much larger issue.
 

 
  • Preparing a mold remediation work plan providing instructions for the remediation activities to be performed for a mold remediation project

  REMEDIATION PROCESS OVERVIEW

Remediators MUST follow the mold protocol and work plan. Following the procedures outlined in the work plan is one of the ways to perform a remediation.

The process used to do the remediation and removal of contaminated materials is as follows:

  • Demolition and removal of all contaminated surfaces
  • If there are any wall openings created by removing contaminated wall four (4) feet and down, they will need to be covered with poly, this will help ensure that the exposed frame (beams) will be protected;
  • If exterior walls have been exposed, after the interior wall has been removed a moisture barrier should be installed by covering the opening with 6mil poly;
  • Items such as sheetrock will be bagged in 6mil poly trash bags;
  • Sharp objects such as metal corners need to be carefully disposed of, since such items can lacerate bags and skin;
  • Nails that are protruding from the contaminated building material should be either bent down, or removed and thrown away by being wrapped in 6mil poly. This will prevent injuries if stepped on and help prohibit cross contamination;

It is recommended that at the end of the work day, remediators use an anti-microbial as a fog (wet mist) to bring the airborne levels of mold spores down. Also, on the following work day the remediator(s) should HEPA vacuum the floor before starting work process again. This will help ensure that all mold spores that fell from the fog are removed. This process should be repeated each day

Mold

Mold or mould, also sometimes referred to as mildew, is a fungal growth that develops on wet materials. Mold is a natural part of the environment and plays an important part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided.

Mold inspection is, for the most part, a visual inspection of a house. … A typical mold inspection involves the inspector talking to the property owner about any areas where they have seen mold, or where there have been moisture problems or water damage in the past.

What is mold?

Mold or mould, also sometimes referred to as mildew, is a fungal growth that develops on wet materials. Mold is a natural part of the environment and plays an important part in nature by breaking down dead organic matter such as fallen leaves and dead trees; indoors, mold growth should be avoided.

Mold Cleanup and removal methods

The purpose of cleanup is to eliminate mold and remove contaminated materials. Killing mold with a biocide is insufficient, since chemicals and proteins causing reactions in humans remain in dead mold. The following methods are used.
  • Evaluation: Before remediation, the area is assessed to ensure safety, clean up the entire moldy area, and properly approach the mold. The EPA provides the following instructions:
  • HVAC cleaning: Should be done by a trained professional.
  • Protective clothing: Includes a half- or full-face respirator mask. Goggles with a half-face respirator mask prevent mold spores from reaching the mucous membranes of the eyes. Disposable hazmat coveralls are available to keep out particles down to one micrometer, and protective suits keep mold spores from entering skin cuts. Gloves are made of rubber, nitrile, polyurethane, or neoprene.
  • Dry brushing or agitation device: Wire brushing or sanding is used when microbial growth can be seen on solid wood surfaces such as framing or underlayment (the subfloor).
  • Dry-ice blasting: Removes mold from wood and cement; however, this process may spray mold and its byproducts into surrounding air.
  • Wet vacuum: Wet vacuuming is used on wet materials, and this method is one of those approved by the EPA.
  • Damp wipe: #MoldRemoval from non-porous surfaces by wiping or scrubbing with water and a detergent and drying quickly.
  • HEPA (high-efficiency particulate air) vacuum: Used in remediation areas after materials have been dried and contaminated materials removed; collected debris and dust is stored to prevent debris release.
  • Debris disposal: Sealed in the remediation area, debris is usually discarded with ordinary construction waste.

     Advanced Mold Removal Methods

Clearnace Testing

  • a description of relevant worksite observations
  • the type and location of all measurements made and samples collected at the worksite
  • all data obtained at the worksite, including temperature, humidity, and material moisture readings
  • the results of analytical evaluation of the samples collected at the worksite
  • copies of all photographs the consultant took
  • a clear statement that the project has passed clearance
  • Certificate of Mold Remediation

Commmercial Mold Remediation FAQ

Our clients include:

  • Hotels, Air BnB, Home Rentals
  • Corpus Christi Schools
  • Homeowners
  • Beauty Spas
  • Hospitals management
  • Condo Developers
  • Commercial property managers
  • Property maintenance teams
  • Churches and Preschools
  • Developers

Corpus Christi, TX Mold Remediation FAQ

Is mold remediation in Corpus Christi covered by insurance?

Corpus Christi home owners insurance covers mold damage if a covered peril caused it. Otherwise, the insurance company may not cover the loss.

Your agent for more insight as to what your policy covers due to the fact that all policies are different and damage may be left to interpretation by an inspector.

More about Corpus Christi

Corpus Christi
Corpus Christi (; Ecclesiastical Latin: Body of Christ) is a coastal cities in the South Texas region of the U.S. state of Texas. The county seat of Nueces County, it also extends into Aransas, Kleberg, and San Patricio Counties. It is 130 miles southeast of San Antonio. Its political boundaries encompass Nueces Bay and Corpus Christi Bay. Its zoned boundaries include small land parcels or water inlets of three neighboring counties.The cities's population was estimated to be 326,586 in 2019, making it the eighth-most populous cities in Texas. The Corpus Christi metropolitan area had an estimated population of 442,600. It is also the hub of the six-county Corpus Christi-Kingsville Combined Statistical Area, with a 2013 estimated population of 516,793. The Port of Corpus Christi is the fifth-largest in the United States. The region is served by the Corpus Christi International Airport.The cities's name means body of Christ in Ecclesiastical Latin, in reference to the Christian sacrament of Holy Communion. The name was given to the settlement and surrounding bay by Spanish explorer Alonso Álvarez de Pineda in 1519, as he discovered the lush semitropical bay on the Western Christian feast day of Corpus Christi. The nickname of the cities is "Sparkling cities by the Sea", particularly featured in tourist literature.




Learn more about Corpus Christi TX - Visit Corpus Christi







Catstrong of Corpus Christi
 
Mold Inspection Fire Restoration Disinfection Services Commercial Roof Replacement TPO Roof Replacement All About Corpus Christi Texas Corpus Christi Neighborhoods, Restaurants and Hotels

Corpus Christi TX Demogrpahic information

Your Local United Corpus Christi Chamber of Commerce

Address: 602 N Staples St Suite 150
Corpus Christi,TX 78401

www.unitedcorpuschristichamber.com
Victoria Chamber of Commerce

Visit Corpus Christi, TX

Click for the latest Allandale weather forecast.
 

Catstrong is a Mold Remediation Company servicing the entire Corpus Christi TX area

, including 78347 78362 78370 78373 78380 78401 78402 78403 78404 78405 78406 78407 78408 78409 78410 78411 78412 78413 78414 78415 78416 78417 78418 78419 78426 78427 78460 78461 78463 78465 78466 78467 78468 78469 78472 78480.

We believe on being on time and our team uses checks the traffic while on our way to you in Corpus Christi.

Need a Mold Inspection

Call us today: Your Health is at RISK!

+13612887193

Why Choose Us?

  • Very Experience
  • Open 24 Hours Every day
  • Fast Arrival Time
  • Competitive Pricing
  • Accepting Credit Cards
  • Quick and Honest Service
  • Excellent Customer Service
  • Commitment and Promise
  • Embrace New Technology
     
Mold Inspection Mold Remediation
black mold mold removal mold removal Corpus Christi mold remediation Corpus Christi

Services Offered in Corpus Christi

679 Bishop Rd, Corpus Christi, TX 78373-9712

Katy Hockley Estates, Flour Bluff, Padre Island, N.A.S., North Beach, Annaville, Northwest Corpus Christi, La Molina, South Side, Bay Area, Mustang Island, Arlington Heights, Central City

  • Removing Mold From Walls
  • Mold Testing
  • Removing Mold From Drywall
  • Mold Treatment
  • Basement Mold Removal
  • Black Mold Removal
  • Mold Testing Companies
  • Mold Removal Cost
  • Mold Remediation Cost
  • Mold Removal Companies
  • Mold Remediation
  • Mold Mitigation
  • Mold Abatement
  • Mold Specialist
  • Mold Remediation Companies
  • Mold Removal
  • Mold Cleanup
  • Mold Removal Services
  • Clearance Testing
  • Mold Assessment